SEM206P Temperature Transmitter
Brand: Status Instruments
Images are representations only.
Digital In-Head Temperature Transmitter
Price
78,60 €
EUR
Stock
In Stock
The SEM206/P is a cost effective "smart" in head transmitter that accepts PT100 temperature sensors and converts sensor output over a configured range to a standard industrial 4-20 mA transmission signal.
PC configuration allows the user to select Range, units and Burnout direction, without requiring calibration equipment.
Configuration is performed quickly using our new USB port driven configurator by simply connecting two clips to the SEM206/P loop terminals and following the software instructions.
Calibration set up may be saved as a file on the PC for later use.
The SEM206/P in head transmitter incorporates the latest digital technology to ensure accurate drift free performance.
Specifications
Brand
Accuracy
- (mA Output/2,000) or 5 μA whichever is greater
- Measurement Accuracy: 0.2° C (0.36° F) ± 0.05 % of Reading
Approvals & Certifications
- EMC - BS EN 61326
Configuration
- USB
Current
- Excitation Current: < 200 μA
Humidity
- Ambient: 10 to 90 % Non-Condensing Relative Humidity
Linearization
- BS EN 60751 (IEC 751)
- JISC 1604
Operating Temperature
- -40° to 85° C (-40° to 185° F)
Output
- 4-20 mA Current Loop
- Maximum
- Minimum < 3.9 mA (In Low Burn-Out Condition)
Power Supply
- 10-30 Vdc
Power Supply Effect
- Loop Voltage Effect: 0.2 μA/V
Resistance
- 18 to 390 ohms - Sensor Range (Input)
- Maximum
Resistance Effect
- Lead Resistance Effect: 0.002° C/ohm
Response Time
- 1 second
Sensor, Probe Connection
- 2-Wire
- 3-Wire
- Screw Terminal
Sensor, Probe Type
- Pt100
Span - Minimum
- 25° C (77° F)
Storage Temperature
- -50° to 90° C (-58° to 194° F)
System Requirements
- Windows XP
Temperature Range
- Sensor: -195° to 845° C (-319° to 1,553° F)
Thermal Drift
- ± 0.02° C/°C (Input)
- 2 μA/°C (Output)
Turn-On Time
- Start-Up Time: 4 seconds
Update Time
- 500 ms
- Warm-Up Time: 1 Minute to Full Accuracy
