TTR200 Temperature Transmitter
Brand: Status Instruments
Images are representations only.
TTR200 Temperature Transmitter
Brand: Status InstrumentsThe TTR200 ‘smart’ transmitter is designed for use with RTD or Slidewire sensors.
The flexible design allows the use of any resistive sensor within the range of (10 to 10,500) Ohms. Pt100, Pt500, Pt1000, Ni or Cu sensors as well as slide wire sensors up to 100 KiloOhms can be accommodated.
Other sensor characteristics or your own 22 point linearisation characteristic (for slidewire or linear resistance) can be downloaded into the product enabling you to adapt it exactly to your application.
The TTR220X is approved to ATEX and IECEx standards allowing for use in hazardous area applications.
Specifications
Brand
Accuracy
- (mA Output/2,000) or 5 µA whichever is greater
- 0.2° C (0.36° F) ± 0.05 % of Reading + Sensor
- Slide Wire: 0.1 %
Ambient Temperature Range
- Configuration: 10° to 30° C (50° to 86° F)
Approvals & Certifications
- ATEX
- CE - BS EN 61326
- IECEx
Burn-Out
- Downscale - 3.8 mA
- Up Scale - 21.5 mA
Communication
- Baud Rate: 1,200 bit/sec
- USB 2.0
Current
- Excitation Current: < 200 UA
Electrical Connectors
- Screw Terminals 2.5 mm, Max.
Environmental Protection
- IP65
Humidity
- 10 to 90 % Relative Humidity, Non-Condensing
Mounting
- Head Mounted Terminal Block
Operating Temperature
- Operating Ambient Temperature: -40° to 85° C (-40° to 185° F)
Output
- 2-Wire Current Loop
- 4-20 mA
- Loop Effect: ± 0.2 µA/V
Output Load
- (Vsupply-10)/20 kiloohms
Power Supply
- < 1 W Full Power
- Loop Supply: 10-30 Vdc
Resistance
- 10 to 10,500 ohms
- Lead Effect: 20 ohms Per Leg
Response Time
- 500 milliseconds
- Start Up Time: 5 seconds
RTD Type
- Cu100
- Cu1000
- Cu53
- Library Potentiometer
- Ni100
- Ni1000
- Ni120
- Pt100
- Pt1000
- Pt500
Sensor, Probe Connection
- Screw Terminal
Sensor, Probe Diameter
- 1.69” (43 mm)
Sensor, Probe Type
- Cu1000
- Cu53
- Ni100 DIN 0.00618
- Ni1000
- Ni507.5
- Pt100
- Pt1000
- Pt500
- RTD
Storage Temperature
- Storage Ambient Temperature: -50° to 85° C (-58° to 185° F)
System Requirements
- Windows® XP
Temperature Effect
- Lead Effect: 0.002° C/ohm
Thermal Drift
- 0.013 to 0.27 ohm/°C
Update Time
- 160 milliseconds
- Warm-Up: 2 minutes
