SEM1720 Dual Channel Signal Conditioner

Brand: Status Instruments

SEM1720 Dual Channel Signal Conditioner

Brand: Status Instruments
SEM1720 is a dual channel signal conditioner designed to accept RTD, Thermocouple or Potentiometer sensors and provide isolated, industrial process output signals in mA or Volts. 

Each output channel may be linked to either input sensor or to a maths function of both sensor signals. 

This powerful feature allows the device to operate in a number of different modes. 

SEM1720 is configured using the free USB SpeedLink software that allows the user to configure the device without requiring calibration equipment. 

Maths functions on each channel can be set up using the software as well as a 22 segment profile tool. Input output simulation tools for diagnostic purposes are also available. Thanks
Features
  • Dual Channel With 5 Port Isolation (3.75Kv)
  • Accepts RTD, Thermocouple or Potentiometer Sensors
  • Universal Voltage Or Current Outputs
  • Maths Functions Between Channels
  • Sensor Redundancy Switching
  • Eight User Configured Preset Configurations

Specifications

Accuracy

  • ± 0.05 % - Slide Wire for Input (Channels 1 & 2)
  • ± 10 µV 1 Reading/second - Thermocouple Input: mV
  • ± 5 mV - Voltage Range for Output (Channels 1 & 2)
  • 1 Reading/second ± 0.15° C (± 0.27° F) + (0.05 % of Full Scale Reading) - RTD Input
  • 1 Reading/second ± 0.5° C (± 0.9° F) + (0.1 % of Full Scale Reading) - Thermocouple Input: K, J, E, N, T, R, S, L, B, U, C, D, G
  • Cold Junction: -20 to 70° C ± 0.5° C, Tracking ± 0.05° C/°C

Calibration

  • ± 5 µA

Communication

  • USB

Connection Style

  • Screw Terminal - Output Connection

Current

  • 0.5 A - Protection
  • 0-20 mA - Full Range
  • 0 to 23.1 mA to Max.

Display

  • Green LED
  • Red LEDs

Humidity

  • 10 to 90 % Relative Humidity, Non-Condensing

Indication

  • LED

Input

  • < 450 µA - Excitation

Input Impedance

  • 1 Megaohm

Input Signal

  • RTD
  • Thermocouples

Isolation

  • 3,750 Vdc - Galvanic Isolation Test Voltage - Input Output Ports
  • 4,000 Vdc - Galvanic Isolation Test Voltage - Supply to Input/Output

Load

  • Voltage Load: Min. 1 Kiloohm

Mounting

  • DIN Rail

Operating Temperature

  • -20° to 70° C (-4° to 158° F)

Operating Voltages

  • 253 Vac - Working Voltage

Output

  • 0-10 V - Full Range
  • 0 to 10.1 V - Max.

Power

  • 3 W at Full Output Current

Power Supply Effect

  • 0.2 µA/V (Sink Mode) - Loop Voltage Effect

Range

  • -200 to 200 mV

Resistance

  • 0 to 1 kiloohms Min.
  • 0 to 100 kiloohms Pot, Max.

Response Time

  • 200 milliseconds

RTD Type

  • Cu100
  • Cu53 (GOST)
  • Ni100 (DIN)
  • Ni120 (Nickel A)
  • Pt100 (IEC, IPTS-68, ITS-90)

Sensor, Probe Connection

  • 3-Wire

Sensor, Probe Type

  • B Thermocouple
  • C(W5) Thermocouple
  • D(W3) Thermocouple
  • E Thermocouple
  • G(W) Thermocouple
  • J Thermocouple
  • K Thermocouple
  • L Thermocouple
  • N Thermocouple
  • R Thermocouple
  • S Thermocouple
  • T Thermocouple
  • U Thermocouple

Stability

  • ± 0.015 % of Full Scale Reading/°C - RTD Input
  • ± 0.05 % of Full Scale Reading/°C - Thermocouple Input: K, J, E, C(W5), D(W3), G(W), mV
  • ± 0.08 % of Full Scale Reading/°C - Thermocouple Input: N, L, U
  • ± 0.10 % of Full Scale Reading/°C - Thermocouple Input: R, S, B
  • ± 0.15 % of Full Scale Reading/°C - Thermocouple Input: T
  • ± 1 μV/°C - Voltage Range for Output (Channels 1 & 2)
  • ± 5 μA/°C - Current Range for Output (Channels 1 & 2)

Storage Temperature

  • -40° to 85° C (-40° to 185° F)

Supply Voltage

  • 10-30 Vdc - Output Current Sink
  • 20-240 Vac at 50/60 Hz
  • 20-240 Vdc
  • 250 Vac - Max.

System Requirements

  • Windows® XP

Temperature Range

  • -20° to 70° C (-4° to 158° F) ± 0.5° C (0.9° F) - Cold Junction
  • -200° to 2,300° C (-328° to 4,172° F)

Turn-On Time

  • 4 seconds - Start Up Time

Update Time

  • 1 Minute - Warm-Up Time
  • 200 milliseconds

Zero Offset

  • ± 10° C (± 18° F) - Sensor Offset

show more