DM3400 Series Digital Indicator
Brand: Status InstrumentsDM3400 Series Digital Indicator
Brand: Status InstrumentsThe DM3400 series uses proven technology to accept all commonly used temperature or process inputs.
Engineering units are displayed on a high efficiency Red LED display that provides excellent readability. The DM3410 takes inputs directly from Pt100 or Thermocouple sensors for Temperature indication.
The DM3420 current and voltage for Process indication. The DM3420 also has a transmitter power supply built in for excitation of 2-Wire (4 to 20) mA process transmitters.
The highly innovative case design enables output option ‘Pods’ to be easily installed without the need for dismantling or recalibration.
'Plug and Play' Pods are available covering:
- POD-02 2 x Relay outputs
- POD-03 Active or Passive Isolated re-transmission ((0 to 10) mA, (0 to 20) mA, (4 to 20) mA)
A maximum of 2 POD outputs can be fitted to each indicator. The indicator provides a transmitter power supply on the output to excite the POD-03 current retransmission.
Output combinations are
- Dual Relay Pod and Retransmission Pod
- Dual Relay Pod and Dual Relay Pod
- Dual Relay Pod
- Retransmission Pod
The front panel is sealed to IP65 and the case has a moulded in rubber gasket enabling it to seal to the panel maintaining the IP65 rating, ideal for installing it in 'dusty' areas or where low pressure jets of water are used to clean down equipment.
The unit is programmed using the three push buttons on the front panel where the user is guided through the configuration process.
Specifications
Brand
Accuracy
- 0.05 % of Full Scale (Process Indicator)
- Cold Junction Error: ± 0.5° C (± 0.9° F) (Universal Temperature Indicator)
- Cold Junction Tracking: 0.05° C/°C (Universal Temperature Indicator)
- Isolated Re-Transmission: 0.07 % of Full Scale
Approvals & Certifications
- Electrical Safety: UL BS EN 61010-1, Flammability: UL 94VO
- EMC BS EN 50081-1 (Emissions), BS EN 50082-2 (Susceptibility)
- Flammability: IEC 707 FV0
Consumption
- 6 VA, Max.
Current
- 0-20 mA (Process Indicator)
- Excitation Current: 300-550 µA (Universal Temperature Indicator)
- Ripple Current: < 3 µA
Display
- 4-Digit Red LED (14.2 mm High/High Intensity)
- -999 to 9,999
Electrical Connectors
- Termination: Screw Terminal
Electrical Contacts
- 2 x Changeover Relays Common Wiper
Environmental Protection
- Sealing: Panel IP65
Excitation Voltage
- 24 V ± 5 % at 50 mA (Process Indicator)
Humidity
- 10 to 90 % Relative Humidity, Non-Condensing
Indication
- 4 Alarm Red LED Indicators 2.5 mm High Numeric
Input Impedance
- Current: 47 ohms (Process Indicator)
- Voltage: 1 Megaohm (Process Indicator)
Isolation
- 500 Vac: Breakdown Isolation, Input/Output RMS (Galvanically Isolated)
Linearization
- Linear (Process Indicator)
- Square Root (Process Indicator)
Load
- Maximum
Materials of Construction
- ABS/Polycarbonate
Measurement Accuracy
- RTD: 0.1° C (32.18° F) ± 0.05 % of Reading (Universal Temperature Indicator)
- Thermocouple: ± 0.04 % of FRI ± 0.04 % of Reading or 0.5° C (0.9° F), whichever is greater (Universal Temperature Indicator)
Operating Temperature
- -30° to 60° C (-22° to 140° F)
Output
- 0 to 23 mA
Output Load
- 1 Kiloohm
Power
- AC - Max.
- DC - Max.
Power Supply
- S1: 90-253 Vac, (50/60 Hz)
- S2: 20-35 Vdc
Power Supply Effect
- Voltage Effect: 0.2 μA/V
Resistance
- Maximum
- Sensor: 18 to 390 ohms (Universal Temperature Indicator)
Resistance Effect
- Lead Resistance Effect: 0.002° C/ohms (Universal Temperature Indicator)
RTD Type
- Pt100
Sensor, Probe Type
- E Thermocouple
- J Thermocouple
- K Thermocouple
- L Thermocouple
- N Thermocouple
- RTD
- R Thermocouple
- S Thermocouple
- T Thermocouple
Stability
- 1 µA/°C
Storage Temperature
- -50° to 85° C (-58° to 185° F)
Supply Voltage
- 0-10 V (Process Indicator)
- Maximum
Temperature Range
- Cold Junction Range: -30° to 60° C (-22° to 140° F) (Universal Temperature Indicator)
- Sensor: -200° to 850° C (-328° to 1,562° F) (Universal Temperature Indicator)
Thermal Drift
- Span: 0.01 %/°C
- Zero: 0.008° C/°C (Universal Temperature Indicator)
- Zero: 0.1 µV/°C
Time Constant
- Filter Off: < 1 second (to 63 % of Final Value)
Update Time
- 250 milliseconds, Max.
- Warm-Up Time: 120 seconds to Full Accuracy
Voltage
- Maximum
Displaying prices & availability for Virginia, United States in EUR. Change location or currency.
Models matching criteria: 4
Power Supply (90 to 253) VAC (50 to 60) Hz
In Stock
168,60 €
EUR
Panel Mount Digital Indicator
In Stock
176,50 €
EUR
Red LED Smart Digital Digital Thermometer - 4 Digit - (20-35V DC)
In Stock
180,00 €
EUR
Red LED Smart Digital Process Indicator
In Stock