PDW30 and PDW90 Repeater Field Unit

Brand: Precision Digital Corporation

Wireless signal repeaters are used to retransmit wireless signals when connectivity is an issue.

They are incredibly simple to install as they only require power and a network ID.

Any units in range of the repeater with the same network ID will retransmit through it, thus increasing signal strength.

Use repeaters to broadcast over very long distances or around permanent obstacles.
Features
  • Wireless Repeater Unit in a Rugged, Industrial Housing
  • Simple to Order, Configure, and Install
  • Increase Range an Additional 1 Mile Line-of-Sight, 500' Indoor
  • Remote or Attached Antenna
  • Flanges for Wall or Pipe Mounting
  • Software Available for Even Easier Setup
  • Rugged, IP68, NEMA 4X Enclosure
  • 3-Year Warranty

Specifications

Display

  • 32-character dual-line alphanumeric dot matrix LCD display with backlight
  • 4.68 mm × 2.21 mm characters

Display Orientation

  • Display may be mounted at 180° from default orientation

Network ID

  • Field selectable: 0 - 99

Programming Methods

  • Four programming buttons behind glass or PC with PDW Manager software

Password

  • A programmable password restricts modification of programmed settings

Power

  • 12-28 Vdc
  • 5 W max

Non-volatile Memory

  • All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost

Isolation

  • 500 V

Environmental

  • Operating temperature range: -40 to 65° C
  • Display inoperable < -20 °C
  • Storage temperature range: -40 to 85° C
  • Relative humidity: 0 to 90 % non-condensing

Connections

  • Removable screw terminal blocks accept 16 to 30 AWG wire

Enclosure

  • Cast aluminum with glass window
  • 0.30 % max Copper content
  • Corrosion resistant powder coating
  • Color: blue
  • NEMA 4X/IP68
  • Two 1/2" NPT threaded conduit openings
  • One 1/2" NPT stainless steel conduit plug with 10 mm hex key fitting installed

Mounting

  • May be mounted directly to conduit
  • Two mounting holes for 1.5” pipe or wall mounting

Tightening Torque

  • 2.5 lb-in
  • 0.28 Nm

Shipping Dimensions

  • 17” × 14” × 9”
  • 43.2 cm × 35.6 cm × 22.9 cm

Shipping Weight

  • 5 lbs
  • 2.27 kg

Show More